tio(1)                                                                                                         User Commands                                                                                                         tio(1)

NAME
       tio - a serial device I/O tool

SYNOPSIS
       tio [<options>] <tty-device|profile|tid>

DESCRIPTION
       tio is a serial device tool which features a straightforward command-line and configuration file interface to easily connect to serial TTY devices for basic I/O operations.

OPTIONS
       -b, --baudrate <bps>

              Set baud rate [bps] (default: 115200).

       -d, --databits 5|6|7|8

              Set data bits (default: 8).

       -f, --flow hard|soft|none

              Set flow control (default: none).

       -s, --stopbits 1|2

              Set stop bits (default: 1).

       -p, --parity odd|even|none|mark|space

              Set parity (default: none).

              Note: With mark parity the parity bit is always 0. With space parity the parity bit is always 1. Not all platforms support mark and space parity.

       -o, --output-delay <ms>

              Set output delay [ms] inserted between each sent character (default: 0).

       -O, --output-line-delay <ms>

              Set output delay [ms] inserted between each sent line (default: 0).

           --output-line-delay-char cr|lf

              Set trigger character of output line delay (default: lf).

           --line-pulse-duration <duration>

              Set the pulse duration [ms] of each serial port line using the following key value pair format in the duration field: <key>=<value>

              Each key represents a serial line. The following keys are available:

              DTR     Data Terminal Ready

              RTS     Request To Send

              CTS     Clear To Send

              DSR     Data Set Ready

              DCD     Data Carrier Detect

              RI      Ring Indicator

              If defining more than one key value pair, the pairs must be comma separated.

              The default pulse duration for each line is 100 ms.

       -a, --auto-connect new|latest|direct

              Automatically connect to serial device according to one of the following strategies:

              new       Automatically connect to first new appearing serial device.

              latest    Automatically connect to latest registered serial device.

              direct    Connect directly to specified TTY device.

              All the listed strategies automatically reconnects according to strategy if device is not available or connection is lost.

              Default value is "direct".

           --exclude-devices <pattern>

              Exclude devices by pattern ('*' and '?' supported).

           --exclude-drivers <pattern>

              Exclude drivers by pattern ('*' and '?' supported).

           --exclude-tids <pattern>

              Exclude topology IDs by pattern ('*' and '?' supported).

       -n, --no-reconnect

              Do not reconnect.

              This means that tio will exit if it fails to connect to device or an established connection is lost.

       -N, --no-tty-restore

              Do not restore initial TTY device settings.

              This means that tio will exit without trying to restore TTY device settings that existed when tio was started.

       -e, --local-echo

              Enable local echo.

       -t, --timestamp

              Enable line timestamp.

           --timestamp-format <format>

              Set timestamp format to any of the following timestamp formats:

              24hour          24-hour format ("hh:mm:ss.sss")

              24hour-start    24-hour format relative to start time

              24hour-delta    24-hour format relative to previous timestamp

              iso8601         ISO8601 format ("YYYY-MM-DDThh:mm:ss.sss")

              epoch           Seconds since Unix epoch (1970-01-01)

              epoch-usec      Seconds since Unix epoch (1970-01-01) with subdivision in microseconds

              Default format is 24hour

           --timestamp-timeout <ms>

              Set timestamp timeout value in milliseconds.

              This value only takes effect in hex output mode where timestamps are only printed after elapsed timeout time of no output activity from tty device.

              Default value is 200.

       -l, --list

              List available targets (serial devices, TIDs, configuration profiles).

       -L, --log

              Enable log to file.

              The log file will be automatically named using the following format tio_TARGET_YYYY-MM-DDTHH:MM:SS.log. Target being the command line target such as tty-device, tid, or configuration profile.

              The filename can be manually set using the --log-file option.

           --log-file <filename>

              Set log filename.

           --log-directory <path>

              Set log directory path in which to save automatically named log files.

           --log-append

              Append to log file.

           --log-strip

              Strip control characters and escape sequences from log.

       -m, --map <flags>

              Map (replace, translate) characters on input from the serial device or output to the serial device. The following mapping flags are supported:

              ICRNL       Map CR to NL on input (unless IGNCR is set)

              IGNCR       Ignore CR on input

              IFFESCC     Map FF to ESC-c on input

              INLCR       Map NL to CR on input

              INLCRNL     Map NL to CR-NL on input

              ICRCRNL     Map CR to CR-NL on input

              IMSB2LSB    Map MSB bit order to LSB on input

              OCRNL       Map CR to NL on output

              ODELBS      Map DEL to BS on output

              ONLCRNL     Map NL to CR-NL on output

              OLTU        Map lowercase characters to uppercase on output

              ONULBRK     Map nul (zero) to send break signal on output

              OIGNCR      Ignore CR on output

              If defining more than one flag, the flags must be comma separated.

           --keymap <keymaps>

              Specify the mappings as @<key-1>=<script-description-1> @<key-2>=<script-description-2>... @<key-N>=<script-description-N>.

              Script-description is script-filename or '!'script-commands.

           --input-mode normal|hex|line

              Set input mode.

              In normal mode input characters are sent immediately as they are typed.

              In hex input mode bytes can be sent by typing the two-character hexadecimal representation of the 1 byte value, e.g.: to send 0xA you must type 0a or 0A.

              In line input mode input characters are sent when you press enter. You can use the cursor keys and backspace key to edit the line and recall command history. The history is maintained while tio is running.

              Default value is "normal".

           --output-mode normal|hex|hexN

              Set output mode.

              In hex mode each incoming byte is printed out as a 1 byte hex value.

              In hexN mode, N is a number less than or equal to 4096 which defines how many hex values will be printed before a line break.

              Default value is "normal".

       -c, --color 0..255|bold|none|list

              Colorize tio text using ANSI color code value ranging from 0 to 255 or use "none" for no color or use "bold" to apply bold formatting to existing system color.

              Use "list" to print a list of available ANSI color codes.

              Default value is "bold".

       -S, --socket <socket>

              Redirect I/O to socket.

              Any  input from clients connected to the socket is sent on the serial port as if entered at the terminal where tio is running (except that ctrl-t sequences are not recognized), and any input from the serial port is multi‐
              plexed to the terminal and all connected clients.

              Sockets remain open while the serial port is disconnected, and writes will block.

              Various socket types are supported using the following prefixes in the socket field:

              unix:<filename>     Unix Domain Socket (file)

              inet:<port>         Internet Socket (network)

              inet6:<port>        Internet IPv6 Socket (network)

              If port is 0 or no port is provided default port 3333 is used.

              At present there is a hardcoded limit of 16 clients connected at one time.

           --raw off|on|on-nodelay

              Set raw mode for non-interactive use.
              Non-interactive use is Piped-input / Shell command execution / XYMODEM transfering.

              The raw option can be set to one of the following:

              off         flow control, character mapping and output delay are enabled

              on          software flow control and character mapping are disabled; output delay remains enabled

              on-nodelay  software flow control, character mapping and output delay is disabled

              Default value is "on".

           --raw-interactive off|on|on-nodelay

              Set raw mode for interactive use.
              Interactive use is normal terminal input/output and socket redirection.

              This is useful when transferring files through socket redirection.

              Default value is "off".

           --rs-485

              Enable RS-485 mode.

           --rs-485-config <config>

              Set the RS-485 configuration using the following key or key value pair format in the configuration field:

              RTS_ON_SEND=value             Set logical level (0 or 1) for RTS pin when sending

              RTS_AFTER_SEND=value          Set logical level (0 or 1) for RTS pin after sending

              RTS_DELAY_BEFORE_SEND=value   Set RTS delay (ms) before sending

              RTS_DELAY_AFTER_SEND=value    Set RTS delay (ms) after sending

              RX_DURING_TX                  Receive data even while sending data

              If defining more than one key or key value pair, they must be comma separated.

       --alert none|bell|blink

              Set alert action on connect/disconnect.

              It will sound the bell once or blink once on successful connect. Likewise it will sound the bell twice or blink twice on disconnect.

              Default value is "none".

       --mute

              Mute tio messages.

       --script-init-file <filename>

              Run script from file with filename on tio's startup.

              Execution occurs before connecting to the device, and loaded functions and variables are preserved.

              The default is <<not-specified>>, which only loads built-in functions and variables.

       --script <string>

              Run script from string on connect.

       --script-file <filename>

              Run script from file with filename on connect.

       --script-run once|always|never

              Run script on connect once, always, or never.

              Default value is "always".

       --exec <command>

              Execute shell command with I/O redirected to device

              The standard output and standard error of a shell command are redirected to the device through tio's output filters (with output mapping and output delay enabled), and input from the device is redirected to
              the standard input of the shell command.

              If you specify '?' as a shell commands prefix, standard error output will not be redirected. This allows you to use some communication commands such as sz/rz.

       --complete-profiles

              Prints profiles (for shell completion)

       -v, --version

              Display program version.

       -h, --help

              Display help.

KEY COMMANDS
       In session, all key strokes are forwarded to the serial device except the following key sequence: a prefix key (default: ctrl-t) followed by a command key. These sequences are intercepted as key commands:

       ctrl-t ?        List available key commands

       ctrl-t b        Send serial break (triggers SysRq on Linux, etc.)

       ctrl-t c        Show configuration (baudrate, databits, etc.)

       ctrl-t e        Toggle local echo mode

       ctrl-t f        Toggle log to file

       ctrl-t F        Flush data I/O buffers (discard data written but not transmitted and data received but not read)

       ctrl-t g        Toggle serial port line

       ctrl-t i        Toggle input mode

       ctrl-t j        Toggle raw mode for non-interactive use

       ctrl-t J        Toggle raw mode for interactive use

       ctrl-t l        Clear screen

       ctrl-t L        Show line states (DTR, RTS, CTS, DSR, DCD, RI)

       ctrl-t m        Change mapping of characters on input or output

       ctrl-t o        Toggle output mode

       ctrl-t p        Pulse serial port line

       ctrl-t q        Quit

       ctrl-t r        Run script

       ctrl-t R        Execute shell command with I/O redirected to device

       ctrl-t s        Show TX/RX statistics

       ctrl-t t        Toggle line timestamp mode

       ctrl-t v        Show version

       ctrl-t x        Send file using the XMODEM-1K, XMODEM-CRC or XMODEM-SUM protocol (prompts for file name and protocol)

       ctrl-t y        Send file using the YMODEM protocol (prompts for file name)

       ctrl-t ctrl-t   Send ctrl-t character

SCRIPT API
       Tio supports Lua scripting to easily automate interaction with the tty device.

       In addition to the standard Lua API tio makes the following functions available:

       tio.expect(pattern, timeout)
             Waits for the Lua pattern to match or timeout before continuing. Special characters must be escaped with '\\' or '%'.
             Timeout is in milliseconds, defaults to tio.C.WAIT_FOREVER(==0) meaning it will wait forever.

             On success, returns the captures from the pattern and all received data.
             On timeout, returns nil and all received data.

       tio.expects(pattern-table, timeout)
             Waits for any of the multiple Lua patterns to match or timeout before continuing. Special characters must be escaped with '\\' or '%'.
             Timeout is in milliseconds, defaults to tio.C.WAIT_FOREVER(==0) meaning it will wait forever.

             On success, returns the index of the matched pattern, the captures from it and all received data.
             On timeout, returns nil, nil and all received data.

       tio.read(size, timeout)
             Read up to size bytes from serial device. If timeout is tio.C.WAIT_FOREVER(==0) or not provided it will wait forever until data is ready to read.
             If the timeout is tio.C.NOWAIT (==-1), the function immediately reads as much data as possible from the serial device's RX buffer, up to a maximum of <size> bytes, and returns.

             On success, returns read data as string. Also emits a single timestamp to stdout and log file per options.timestamp and options.log.
             On timeout, returns nil and received data.

       tio.readline(timeout)
             Read line from serial device. If timeout is tio.C.WAIT_FOREVER(==0) or not provided it will wait forever until data is ready to read.
             The line separater is LF (0x0a).

             On success, returns received line as string. Also emits a single timestamp to stdout and log file per options.timestamp and options.log.
             On timeout, returns nil and received data.

       tio.write(string)
             Write string to serial device without input-editing, output-mapping nor output-delay.

             Returns the tio table on success or nil on error.

       tio.twrite(string)
             Write string to serial device with input-editing, output-mapping and output-delay.

             Returns the tio table on success or nil on error.

       tio.send(file, protocol)
             Send file using x/y-modem protocol.

             Protocol can be any of XMODEM_1K, XMODEM_CRC, XMODEM_SUM, YMODEM.
             It can alternatively be one of tio.C.XM_1K, tio.C.XM_CRC, tio.C.XM_SUM, tio.C.YM_NORMAL.

       tio.receive(file, protocol)
             Receive a file using the XMODEM protocol.

             Protocol can be any of XMODEM_CRC or XMODEM_SUM.
             It can alternatively be one of tio.C.XM_CRC or tio.C.XM_SUM.

             Returns the tio table on success or nil on error.

       tio.ttysearch()
             Search for serial devices.

             Returns a table of number indexed tables, one for each serial device found.  Each of these tables contains the serial device information accessible via the following string indexed elements "path", "tid",  "uptime",  "dri‐
             ver", "description".

             Returns nil if no serial devices are found.

       tio.set{line=state, ...}
             Set state of one or multiple tty modem lines.

             Line can be any of DTR, RTS, CTS, DSR, CD, RI

             State is high (==tio.C.LN_HIGH), low (==tio.C.LN_LOW), or toggle (==tio.C.LN_TOGGLE).

       tio.sleep(seconds)
             Sleep for seconds.

       tio.msleep(ms)
             Sleep for milliseconds.

       tio.send_break()
             Send break signal.
             It is equivalent to the key command ctrl-t b.

       tio.line_get()
             Get state of multiple tty modem lines.
             It is equivalent to the key command ctrl-t L.

             Return 6 values DTR, RTS, CTS, DSR, CD, RI.
             Each return value is high (==tio.C.LN_HIGH) or low (==tio.C.LN_LOW).

       tio.set_local_echo(on_off)
             Change the local echo setting.
             It is equivalent to the key command ctrl-t e.

             The argument on_off is a boolean value. true means on and false means off. If omitted, it is set to true.

       tio.set_log(on_off)
             Change the log-file setting.
             It is equivalent to the key command ctrl-t f.

             The argument on_off is a boolean value. true means on and false means off. If omitted, it is set to true.

       tio.flush_data_io_buffer()
             Flush read/write data in I/O buffers.
             It is equivalent to the key command ctrl-t F.

       tio.set_input_mode(input_mode)
             Change the input mode.
             It is equivalent to the key command ctrl-t i.

             The argument input_mode is one of tio.C.IM_NORMAL, tio.C.IM_HEX, tio.C.IM_LINE.

       tio.set_output_mode(output_mode)
             Change the output mode.
             It is equivalent to the key command ctrl-t o.

             The argument output_mode is one of tio.C.OM_NORMAL, tio.C.OM_HEX.

       tio.set_raw_mode(raw_mode)
             Change the raw mode for non-interactive use.
             It is equivalent to the key command ctrl-t j.

             The argument raw_mode is one of tio.C.RAW_OFF, tio.C.RAW_ON, tio.C.RAW_ON_NODELAY.

       tio.set_raw_mode_interactive(raw_mode)
             Change the raw mode for interactive use.
             It is equivalent to the key command ctrl-t J.

             The argument raw_mode is one of tio.C.RAW_OFF, tio.C.RAW_ON, tio.C.RAW_ON_NODELAY.

       tio.set_timestamp_mode(timestamp_mode)
             Change the timestamp mode.
             It is equivalent to the key command ctrl-t t.

             The argument timestamp_mode is one of tio.C.TS_OFF, tio.C.TS_24HOUR, tio.C.TS_24HOUR_START, tio.C.TS_24HOUR_DELTA, tio.C.TS_ISO861, tio.C.TS_EPOCH, tio.C.TS_EPOCH_USEC.

       tio.exec_shell_command(shell_commands)
             Execute /bin/sh -c <<shell_commands>>.
             Normally, standard output / standard error is forwarded to tio's output filter which do output mapping and output delay.
             If the shell commands starts with '?', '?' is removed and standard error is not forwarded.
             It is equivalent to the key command ctrl-t R.

             The argument shell_commands is string.

       tio.get_state()
             Return the main state of tio as a integer.
             Return value is one of tio.C.SA_INTERACTIVE, tio.C.SA_STARTING, tio.C.SA_PIPED_INPUT, tio.C.SA_PIPED_INPUT, tio.C.SA_EXEC_SHELL_COMMAND, tio.C.SA_XYMODEM.

       tio.get_version()
             Return the version of tio as a string.
             It is equivalent to the key command ctrl-t v.

       tio.inkey(timeout)
             Read a key press and return it as a string.

             Timeout is in milliseconds. If timeout is tio.C.WAIT_FOREVER(==0),
             the function blocks until a key is pressed. If timeout is
             tio.C.NOWAIT (==-1) or not provided, the function returns
             immediately.

             Returns the key as a string on success, or nil on timeout.

       tio.input(prompt)
             Display a prompt and read user input until Enter is pressed.

             Basic line editing is supported (Backspace key).

             If prompt is not provided, no prompt is displayed.

             Returns the entered string.

       tio.inputline(prompt)
             Display a prompt and read a line of input until Enter is pressed.

             Supports line editing (cursor keys, Backspace) and command
             history.

             Returns the entered string.

       tio.set_keymap(keymaps)
             Add, update, or remove key mappings.

             The <keymaps> argument uses the same syntax as the --keymap option:

                   @<key-1>=<script-description-1>
                   @<key-2>=<script-description-2>
                   ...
                   @<key-N>=<script-description-N>

             Each <script-description> must be either a script filename or an inline script prefixed with '!'.

             When a mapping is defined, pressing Ctrl-T followed by <key-n> executes the corresponding script.

             If a key already has a mapping, it will be updated. If <script-description> is empty, the mapping is removed.

             User-defined key mappings take precedence over default key bindings, except for "Ctrl-T q", which is always reserved.

             This function can be used to dynamically modify key mappings at runtime after tio has started.

       tio.subcmd_println(fmt, ...)
             Print a formatted line using sub-command style output.

             The output format is:
                   [<timestamp>] <formatted message>

       tio.subcmd_warning_println(fmt, ...)
             Print a formatted warning line using sub-command style output.

       tio.subcmd_error_println(fmt, ...)
             Print a formatted error line using sub-command style output.

       tio.subcmd_puts(string)
             Print a string using sub-command style output.

             The output format is:
                   [<timestamp>] <string>

       tio.subcmd_warning_puts(string)
             Print a warning string using sub-command style output.

       tio.subcmd_error_puts(string)
             Print an error string using sub-command style output.

       tio.alwaysecho
             A boolean value, defaults to true.

             If tio.alwaysecho is false, the result of tio.read, tio.readline or tio.expect will only be returned from the function and not logged or printed.
             If tio.alwaysecho is set to true, reading functions also emit a single timestamp to stdout and log file per options.timestamp and options.log.

       os.exit(code)
             Exit tio process with exit code (like ctrl-t q).


CONFIGURATION FILE
       Options can be set via configuration file using the INI format. tio uses the configuration file first found in the following locations in the order listed:

       $XDG_CONFIG_HOME/tio/config

       $HOME/.config/tio/config

       $HOME/.tioconfig

       Labels can be used to group settings into named configuration profiles which can be activated from the command-line when starting tio.

       tio will try to match the user input to a configuration profile by name or by pattern to get the TTY device and other options.

       Options without any label change the default options.

       Any options set via command-line will override options set in the configuration file.

       The following configuration file options are available:

       pattern                  Pattern matching user input. This pattern can be an extended regular expression with a single group.

       device                   TTY device to open. If it contains a "%s" it is substituted with the first group match.

       baudrate                 Set baud rate

       databits                 Set data bits

       flow                     Set flow control

       stopbits                 Set stop bits

       parity                   Set parity

       output-delay             Set output character delay

       output-line-delay        Set output line delay

       output-line-delay-char   Set trigger character of output line delay

       line-pulse-duration      Set line pulse duration

       no-reconnect             Do not reconnect

       log                      Enable log to file

       log-file                 Set log filename

       log-directory            Set log directory path in which to save automatically named log files.

       log-append               Append to log file

       log-strip                Enable strip of control and escape sequences from log

       local-echo               Enable local echo

       timestamp                Enable line timestamp

       timestamp-format         Set timestamp format

       timestamp-timeout        Set timestamp timeout

       map                      Map characters on input or output

       keymap                   Set key-script mappings

       color                    Colorize tio text using ANSI color code ranging from 0 to 255

       input-mode               Set input mode

       output-mode              Set output mode

       socket                   Set socket to redirect I/O to

       prefix-ctrl-key          Set prefix ctrl key (a..z or 'none', default: t)

       rs-485                   Enable RS-485 mode

       rs-485-config            Set RS-485 configuration

       alert                    Set alert action on connect/disconnect

       mute                     Mute tio messages

       script-init-file         Run script from file on tio's startup

       script                   Run script from string on connect

       script-file              Run script from file on connect

       script-run               Set condition to run script on connect

       exec                     Execute shell command with I/O redirected to device

       It is possible to include the content of other configuration files using the include directive like so: "[include <file>]".

CONFIGURATION FILE EXAMPLES
       To change the default configuration simply set options like so:

              [default]
              baudrate = 9600
              databits = 8
              parity = none
              stopbits = 1
              color = 10
              line-pulse-duration = DTR=200,RTS=400

       Named configuration profiles can be added via labels:

              [rpi3]
              device = /dev/serial/by-id/usb-FTDI_TTL232R-3V3_FTGQVXBL-if00-port0
              baudrate = 115200
              color = 11

       Activate the configuration profile by name:

              $ tio rpi3

       Which is equivalent to:

              $ tio -b 115200 -c 11 /dev/serial/by-id/usb-FTDI_TTL232R-3V3_FTGQVXBL-if00-port0

       A configuration profile can also be activated by its pattern which supports regular expressions:

              [usb-devices]
              pattern = ^usb([0-9]*)
              device = /dev/ttyUSB%m1
              baudrate = 115200

       Activate the configuration profile by pattern match:

              $ tio usb12

       Which becomes equivalent to:

              $ tio -b 115200 /dev/ttyUSB12

       It is also possible to combine use of configuration profile and command-line options. For example:

              $ tio -l -t usb12

EXAMPLES
       Typical use is without options:

              $ tio /dev/ttyUSB0

       Which corresponds to the commonly used default options:

              $ tio -b 115200 -d 8 -f none -s 1 -p none /dev/ttyUSB0

       It is recommended to connect serial TTY devices by ID:

              $ tio /dev/serial/by-id/usb-FTDI_TTL232R-3V3_FTGQVXBL-if00-port0

       Using serial devices by ID ensures that tio automatically reconnects to the correct serial device if it is disconnected and then reconnected.

       Redirect serial device I/O to Unix file socket for scripting:

              $ tio -S unix:/tmp/tio-socket0 /dev/ttyUSB0

       Then, to issue a command via the file socket simply do:

              $ echo "ls -la" | nc -UN /tmp/tio-socket0 > /dev/null

       Or use the expect command to script an interaction:

              #!/usr/bin/expect -f

              set timeout -1
              log_user 0

              spawn nc -UN /tmp/tio-socket0
              set uart $spawn_id

              send -i $uart "date\n"
              expect -i $uart "prompt> "
              send -i $uart "ls -la\n"
              expect -i $uart "prompt> "

       It is also possible to use tio's own simpler expect/send script functionality to e.g. automate logins:

              $ tio --script 'tio.expect("login: "); tio.write("root\n"); tio.expect("Password: "); tio.write("root\n")' /dev/ttyUSB0

       Redirect device I/O to network file socket for remote TTY sharing:

              $ tio --socket inet:4444 /dev/ttyUSB0

       Then, use netcat to connect to the shared TTY session over network (assuming tio is hosted on IP 10.0.0.42):

              $ nc -N 10.0.0.42 4444

       Pipe command to the serial device:

              $ echo "ls -la" | tio /dev/serial/by-id/usb-FTDI_TTL232R-3V3_FTGQVXBL-if00-port0

       Pipe command to serial device and wait for line response within 1 second:

              $ echo "*IDN?" | tio /dev/ttyACM0 --script "expect('\r\n', 1000)" --mute

       Likewise, to pipe data from file to the serial device:

              $ cat data.bin | tio /dev/serial/by-id/usb-FTDI_TTL232R-3V3_FTGQVXBL-if00-port0

       Map NL to CR-NL on input from device and DEL to BS on output to device:

              $ tio --map INLCRNL,ODELBS /dev/ttyUSB0

       Enable RS-485 mode:

              $ tio --rs-485 --rs-485-config=RTS_ON_SEND=1,RX_DURING_TX /dev/ttyUSB0

       Manipulate DTR and RTS lines upon first connect to reset connected microcontroller:

              $ tio --script "tio.set{DTR=high,RTS=low}; tio.msleep(100); tio.set{RTS=toggle}" --script-run once /dev/ttyUSB0

       Manipulate DTR and RTS lines by pressing ctrl-t 1:

              $ tio --keymap '@1=!tio.set{DTR=high,RTS=low}; tio.msleep(100); tio.set{RTS=toggle}' /dev/ttyUSB0

       Send file to device by sz command:

              $ tio --exec '?sz -b file' /dev/ttyUSB0

       Receive file from device by rz command:

              $ tio --exec '?rz -b' /dev/ttyUSB0

       Send file to device by gkermit command:

              $ tio --exec '?gkermit -XSs file' /dev/ttyUSB0

       Receive file from device by gkermit command:

              $ tio --exec '?gkermit -XSr' /dev/ttyUSB0

WEBSITE
       Visit https://tio.github.io

AUTHOR
       Maintained by Martin Lund <martin.lund@keep-it-simple.com>.

tio 3.9                                                                                                          2025-04-13                                                                                                          tio(1)
