Add experimental RS-485 support

Many modern RS-485 serial devices such as the ones from FTDI already
operate in RS-485 mode by default and will work with tio out of the box.
However, there are some RS-232/485 devices which need to be switched
from e.g. RS-232 to RS-485 mode to operate accordingly on the physical
level.

This commit implements the switching mechanism and interface required to
enable RS-485 mode. It only works on Linux and with serial devices which
use device drivers that support the Linux RS-485 control interface.

The RS-485 feature is detailed via the following options:

 --rs-485                           Enable RS-485 mode
 --rs-485-config <config>           Set RS-485 configuration

Set the RS-485 configuration using the following key or key value pair
format in the configuration field:

 RTS_ON_SEND=value             Set logical level (0 or 1) for RTS pin when sending
 RTS_AFTER_SEND=value          Set logical level (0 or 1) for RTS pin after sending
 RTS_DELAY_BEFORE_SEND=value   Set RTS delay (ms) before sending
 RTS_DELAY_AFTER_SEND=value    Set RTS delay (ms) after sending
 RX_DURING_TX                  Receive data even while sending data

If defining more than one key or key value pair, they must be comma
separated.

Example use:

 $ tio /dev/ttyUSB0 --rs-485 --rs-r485-config=RTS_DELAY_AFTER_SEND=50,RX_DURING_TX

src/bash-completion/tio.in

@@ -31,6 +31,8 @@ _tio()
           -S --socket \
           -r --response-wait \
              --response-timeout \
+             --rs-485 \
+             --rs-485-config \
           -x --hexadecimal \
           -v --version \
           -h --help"
@@ -122,6 +124,14 @@ _tio()
             COMPREPLY=( $(compgen -W "1 10 100" -- ${cur}) )
             return 0
             ;;
+        --rs-485)
+            COMPREPLY=( $(compgen -W "${opts}" -- ${cur}) )
+            return 0
+            ;;
+        --rs-485-config)
+            COMPREPLY=( $(compgen -W "RTS_ON_SEND RTS_AFTER_SEND RTS_DELAY_BEFORE_SEND RTS_DELAY_AFTER_SEND RX_DURING_TX"  -- ${cur}) )
+            return 0
+            ;;
         -x | --hexadecimal)
             COMPREPLY=( $(compgen -W "${opts}" -- ${cur}) )
             return 0