Adds support for hexN mode where N is a number in the range 1 to 4096
which defines how many hex values will be printed before a line break.
In short, it defines the width of the hex output.
In this mode, if timestamps are enabled they will be added to each hex
line.
* Rename --list-devices to --list
* Rename --no-autoconnect to --no-reconnect
* Switch -l and -L options
* -l now lists available serial devices
* -L enables log to file
* Add option --auto-connect <strategy>
* Supported strategies:
* "new" - Waits to connect first new appearing serial device
* "latest" - Connects to latest registered serial device
* "direct" - Connect directly to specified serial device (default)
* Add options to exclude serial devices from auto connect strategy by
pattern
* Supported exclude options:
* --exclude-devices <pattern>
Example: '--exclude-devices "/dev/ttyUSB2,/dev/ttyS?"'
* --exclude-drivers <pattern>
Example: '--exclude-drivers "cdc_acm"'
* --exclude-tids <pattern>
Example: '--exclude-tids "yW07,bCC2"'
* Patterns support '*' and '?'
* Connect to same port/device combination via unique topology ID (TID)
* Topology ID is a 4 digit base62 encoded hash of a device topology
string coming from the Linux kernel. This means that whenever you
plug in the same e.g. USB serial port device to the same USB hub
port connected via the exact same hub topology all the way to your
computer, you will get the same unique TID.
* Useful for stable reconnections when serial device has no serial
device by ID
* For now, only tested on Linux.
* Reworked and improved listing of serial devices to show serial devices:
* By device
* Including TID, uptime, driver, and description.
* Sorted by uptime (newest device listed last)
* By unique topology ID
* By ID
* By path
* Add script interface 'list = tty_search()' for searching for serial
devices.
This change reintroduces timestamping in hex output mode but based on
timeout instead of new lines which made no sense. This means that
timestamps will only be printed when timeout time has elapsed with no
output activity from serial device.
Adds option --timestamp-timeout <ms> for setting the timeout value in
milliseconds.
Defaults to 200 ms.
Remove options and rework input handling so it is possible to do the
same thing but via script which is much more flexible.
These options were always a bit of a hardcoded solution. With the new
script expect feature we can wait for any type of response.
For example, pipe command to serial device and wait for line response within 1 second:
$ echo "*IDN?" | tio /dev/ttyACM0 --script "expect('\r\n', 1000)" --mute
Replaces -x, --hexadecimal option with --intput-mode and --output-mode
so it is possible to select hex or normal mode for both input and output
independently.
To obtain same behaviour as -x, --hexadecimal use the following
configuration:
input-mode = hex
output-mode = hex
Add key command 'ctrl-t f' which will toggle log on/off.
If no log filename has been specified via the 'log-filename' option then
tio will automatically generate a new log filename every time the log
feature is toggled on. Meaning, when toggled multiple times, multiple
log files will be generated.
However, if a log filename has been specified, tio will only write and
append to that same file.
