Adds support for hexN mode where N is a number in the range 1 to 4096
which defines how many hex values will be printed before a line break.
In short, it defines the width of the hex output.
In this mode, if timestamps are enabled they will be added to each hex
line.
* Rename --list-devices to --list
* Rename --no-autoconnect to --no-reconnect
* Switch -l and -L options
* -l now lists available serial devices
* -L enables log to file
* Add option --auto-connect <strategy>
* Supported strategies:
* "new" - Waits to connect first new appearing serial device
* "latest" - Connects to latest registered serial device
* "direct" - Connect directly to specified serial device (default)
* Add options to exclude serial devices from auto connect strategy by
pattern
* Supported exclude options:
* --exclude-devices <pattern>
Example: '--exclude-devices "/dev/ttyUSB2,/dev/ttyS?"'
* --exclude-drivers <pattern>
Example: '--exclude-drivers "cdc_acm"'
* --exclude-tids <pattern>
Example: '--exclude-tids "yW07,bCC2"'
* Patterns support '*' and '?'
* Connect to same port/device combination via unique topology ID (TID)
* Topology ID is a 4 digit base62 encoded hash of a device topology
string coming from the Linux kernel. This means that whenever you
plug in the same e.g. USB serial port device to the same USB hub
port connected via the exact same hub topology all the way to your
computer, you will get the same unique TID.
* Useful for stable reconnections when serial device has no serial
device by ID
* For now, only tested on Linux.
* Reworked and improved listing of serial devices to show serial devices:
* By device
* Including TID, uptime, driver, and description.
* Sorted by uptime (newest device listed last)
* By unique topology ID
* By ID
* By path
* Add script interface 'list = tty_search()' for searching for serial
devices.
This change reintroduces timestamping in hex output mode but based on
timeout instead of new lines which made no sense. This means that
timestamps will only be printed when timeout time has elapsed with no
output activity from serial device.
Adds option --timestamp-timeout <ms> for setting the timeout value in
milliseconds.
Defaults to 200 ms.
Remove options and rework input handling so it is possible to do the
same thing but via script which is much more flexible.
These options were always a bit of a hardcoded solution. With the new
script expect feature we can wait for any type of response.
For example, pipe command to serial device and wait for line response within 1 second:
$ echo "*IDN?" | tio /dev/ttyACM0 --script "expect('\r\n', 1000)" --mute
Replaces -x, --hexadecimal option with --intput-mode and --output-mode
so it is possible to select hex or normal mode for both input and output
independently.
To obtain same behaviour as -x, --hexadecimal use the following
configuration:
input-mode = hex
output-mode = hex
On some platforms calling high()/low() to switch line states result in
costly system calls whick makes it impossible to swith two or more tty
lines simultaneously.
To help solve this timing issue we introduce a tty line state
configuration API which can be used instead of using
high()/low().
Using config_low(line) and config_high(line) one can set up a new line
state configuration for multiple lines and then use config_apply() to
finally apply the configuration. This will result in only one system
call to instruct the serial port drive to switch all the configured line
states which should help ensure that the lines are switched
simultaneously.
Example:
script = config_high(DTR); config_low(RTS); config_apply()
Add ONULBRK mapping to map nul (zero) to send break signal on output.
This is useful if one needs to e.g. send the break signal to the tty
device when connected via socket.
Add support for running Lua scripts that can manipulate the tty control
lines. Script is activated automatically on connect or manually via in
session key command.
The Lua scripting feature opens up for many posibilities in the future
such as adding expect like functionality to easily and programatically
interact with the connected device.
When entering a file name, eg. 'test' it whould output the following
with 2 stale letters of the former input string:
[14:41:58.987] Send file with XMODEM
[14:42:08.015] Sending file 'test'st
[14:42:08.015] Press any key to abort transfer
To avoid this we simply overwrite the 2 stale letters with whitespaces.
The response wait feature waited for a line response, a string
terminated with either CR or NL. However, some devices may send a CR and
then their line content and then NL. This means tio will quit before
receiving and printing the line response. To solve this we simply ignore
the CR character and only consider lines terminated with a NL character.
This should work for all devices as lines are AFAIK always terminated
with either CRNL or a NL.
Fix regression so that it is possible to send the prefix key code to the
remote tio session without local tio session reacting to same key code
(quitting etc.).
Add key command 'ctrl-t f' which will toggle log on/off.
If no log filename has been specified via the 'log-filename' option then
tio will automatically generate a new log filename every time the log
feature is toggled on. Meaning, when toggled multiple times, multiple
log files will be generated.
However, if a log filename has been specified, tio will only write and
append to that same file.
Print the 2 character hex code that you input in hex mode but then
delete it before sending. This way it is easier to keep track of what
you are inputting. It basically mimics the ctrl-shift-u input mechanism
that is used to input unicode.
