After including the use of glib we might as well replace inih
with the glib key file parser.
All configuraiton file parsing has been reworked and also the options
parsing has been cleaned up, resulting in better and stricter
configuration file and option value checks.
Compared to old, configuration files now requires any default
configurations to be put in a group/section named [default].
Configuration file keywords such as "enable", "disable", "on",
"off", "yes", "no", "0", "1" have been retired. Now only "true" and
"false" apply to boolean configuration options. This is done to simplify
things and avoid any confusion.
The pattern option feature has been reworked so now the user can now
access the full match string and any matching subexpression using the
%mN syntax.
For example:
[usb devices]
pattern = usb([0-9]*)
device = /dev/ttyUSB%m1
Then when using tio:
$ tio usb12
%m0 = 'usb12' // Full match string
%m1 = 12 // First match subexpression
Which results in device = /dev/ttyUSB12
Many modern RS-485 serial devices such as the ones from FTDI already
operate in RS-485 mode by default and will work with tio out of the box.
However, there are some RS-232/485 devices which need to be switched
from e.g. RS-232 to RS-485 mode to operate accordingly on the physical
level.
This commit implements the switching mechanism and interface required to
enable RS-485 mode. It only works on Linux and with serial devices which
use device drivers that support the Linux RS-485 control interface.
The RS-485 feature is detailed via the following options:
--rs-485 Enable RS-485 mode
--rs-485-config <config> Set RS-485 configuration
Set the RS-485 configuration using the following key or key value pair
format in the configuration field:
RTS_ON_SEND=value Set logical level (0 or 1) for RTS pin when sending
RTS_AFTER_SEND=value Set logical level (0 or 1) for RTS pin after sending
RTS_DELAY_BEFORE_SEND=value Set RTS delay (ms) before sending
RTS_DELAY_AFTER_SEND=value Set RTS delay (ms) after sending
RX_DURING_TX Receive data even while sending data
If defining more than one key or key value pair, they must be comma
separated.
Example use:
$ tio /dev/ttyUSB0 --rs-485 --rs-r485-config=RTS_DELAY_AFTER_SEND=50,RX_DURING_TX
