Replace existing toggle and pulse key commands with the following
generalized key commands which allows to toggle or pulse all serial port
lines:
ctrl-t g Toggle serial port line
ctrl-t p Pulse serial port line
When used, user will be asked which serial line to toggle or pulse.
Also introduce --line-pulse-duration option for setting specific pulse
duration in milliseconds for each serial line using a key value pair
format. Each key represents a serial line. The following keys are
available: DTR, RTS, CTS, DSR, DCD, RI.
Example:
$ tio /dev/ttyUSB0 --line-pulse-duration DTR=200,RTS=300,RI=50
Likewise, the pulse duration can also be set via configuration file
using the line-pulse-duration variable:
line-pulse-duration = DTR=200,RTS=300,RI=50
Introduce "bold" color option which only apply bold color formatting to
existing system color.
Also make "bold" the default color option.
Fixes all white issue with black on white tio text.
Make it possible to remap the prefix key (default: ctrl-t) by setting
the prefix-ctrl-key variable in the configuration file.
Allowed values are in the range a..z.
Example, to set the prefix key to ctrl-a simply do:
prefix-ctrl-key = a
Added command line options:
-O, --eol-delay to have a separate delay for end of line
-U, --upper to enable translation of lower case alpha to upper case
Added ability to set mark parity.
Added ctrl-t U key sequence to allow enable/disable lower case alpha to
upper case during a session.
Updated Man page with command line options, ctrl-t sequences and
configuration file options.
Updated README.md, with above information.
MCUs like the ESP32 can be reset if the serial port DTR line is
pulsed for a short time. You could just type CTRL-t d CTRL-t d
but that's a little awkward since you have to lift your finger
off the CTRL key to type the Ds. Now you can just type CTRL-T D.
* Added new command "D" to pulse the DTR line. I.E. Toggle its
state twice with a configurable duration between toggles.
* Added new config/command line option "--dtr-pulse-duration"
to set the duration between the DTR state toggles. The default
is 100ms.
Add support for IPv4 and IPv6 network sockets via socket syntax
"inet:<port>" and "inet6:<port>" respectively.
For example, to listen and redirect serial device I/O to a host bound
IPv4 socket simply do:
$ tio /dev/ttyUSB0 --socket inet:4444
To connect do e.g.:
$ nc 127.0.0.1 4444
Likewise, for IPv6 do:
$ tio /dev/ttyUSB0 --socket inet6:4444
To connect do e.g.:
$ nc ::1 4444
If port is 0 or no port is provided default port 3333 is used.
Rework the color option to support setting ANSI color code values
ranging from 0..255 or "none" for no color or "list" to print a list of
available ANSI colors codes.
Also, disables color when piping.
While in hex mode (ctrl-t h) you can output hexadecimal values.
E.g.: to send 0x0A you have to type 0A (always 2 characters).
Added option -x, --hex to start in hexadecimal mode.
Added option --newline-in-hex to interpret newline characters in hex mode.
This is disabled by default, because, in my opinion, hex stream is
fundamentally different from text, so a "new line" is meaningless in this
context.
Optional arguments, as parsed by the getopt_long mechanism, are
inherently inconsistent with how you define required arguments.
To avoid confusion we decide to avoid this inconsistency by replacing
optional options with additional options with required argmuments.
