The feature is detailed via the following option:
--alert none|bell|blink
Set alert action on connect/disconnect.
It will sound the bell once or blink once on successful connect.
Likewise it will sound the bell twice or blink twice on disconnect.
Default value is "none" for no alert.
Many modern RS-485 serial devices such as the ones from FTDI already
operate in RS-485 mode by default and will work with tio out of the box.
However, there are some RS-232/485 devices which need to be switched
from e.g. RS-232 to RS-485 mode to operate accordingly on the physical
level.
This commit implements the switching mechanism and interface required to
enable RS-485 mode. It only works on Linux and with serial devices which
use device drivers that support the Linux RS-485 control interface.
The RS-485 feature is detailed via the following options:
--rs-485 Enable RS-485 mode
--rs-485-config <config> Set RS-485 configuration
Set the RS-485 configuration using the following key or key value pair
format in the configuration field:
RTS_ON_SEND=value Set logical level (0 or 1) for RTS pin when sending
RTS_AFTER_SEND=value Set logical level (0 or 1) for RTS pin after sending
RTS_DELAY_BEFORE_SEND=value Set RTS delay (ms) before sending
RTS_DELAY_AFTER_SEND=value Set RTS delay (ms) after sending
RX_DURING_TX Receive data even while sending data
If defining more than one key or key value pair, they must be comma
separated.
Example use:
$ tio /dev/ttyUSB0 --rs-485 --rs-r485-config=RTS_DELAY_AFTER_SEND=50,RX_DURING_TX
Add a simple line response feature to make it possible to send e.g. a
command string to your serial device and easily receive and parse a line
response.
This is a convenience feature for simple request/response interaction
based on lines. For more advanced interaction the socket feature should
be used instead.
The line response feature is detailed via the following options:
-r, --response-wait
Wait for line response then quit. A line is considered any string ending
with either CR or NL character. If no line is received tio will quit
after response timeout.
Any tio text is automatically muted when piping a string to tio while in
response mode to make it easy to parse the response.
--response-timeout <ms>
Set timeout [ms] of line response (default: 100).
Example:
Sending a string (SCPI command) to a test instrument (Korad PSU) and
print line response:
$ echo "*IDN?" | tio /dev/ttyACM0 --response-wait
KORAD KD3305P V4.2 SN:32477045
Replace existing toggle and pulse key commands with the following
generalized key commands which allows to toggle or pulse all serial port
lines:
ctrl-t g Toggle serial port line
ctrl-t p Pulse serial port line
When used, user will be asked which serial line to toggle or pulse.
Also introduce --line-pulse-duration option for setting specific pulse
duration in milliseconds for each serial line using a key value pair
format. Each key represents a serial line. The following keys are
available: DTR, RTS, CTS, DSR, DCD, RI.
Example:
$ tio /dev/ttyUSB0 --line-pulse-duration DTR=200,RTS=300,RI=50
Likewise, the pulse duration can also be set via configuration file
using the line-pulse-duration variable:
line-pulse-duration = DTR=200,RTS=300,RI=50
MCUs like the ESP32 can be reset if the serial port DTR line is
pulsed for a short time. You could just type CTRL-t d CTRL-t d
but that's a little awkward since you have to lift your finger
off the CTRL key to type the Ds. Now you can just type CTRL-T D.
* Added new command "D" to pulse the DTR line. I.E. Toggle its
state twice with a configurable duration between toggles.
* Added new config/command line option "--dtr-pulse-duration"
to set the duration between the DTR state toggles. The default
is 100ms.
Rework the color option to support setting ANSI color code values
ranging from 0..255 or "none" for no color or "list" to print a list of
available ANSI colors codes.
Also, disables color when piping.
This feature allows an external program to inject output into and
listen to input from a serial port via a Unix domain socket (path
specified via the -S/--socket command line flag, or the socket
config file option) while tio is running. This is useful for ad-hoc
scripting of serial port interactions while still permitting manual
control. Since many serial devices (at least on Linux) get confused
when opened by multiple processes, and most commands do not know
how to correctly open a serial device, this allows a more convenient
usage model than directly writing to the device node from an external
program.
Any input from clients connected to the socket is sent on the serial
port as if entered at the terminal where tio is running (except that
ctrl-t sequences are not recognized), and any input from the serial
port is multiplexed to the terminal and all connected clients.
Sockets remain open while the serial port is disconnected, and writes
will block.
Example usage 1 (issue a command):
echo command | nc -UN /path/to/socket > /dev/null
Example usage 2 (use the expect command to script an interaction):
#!/usr/bin/expect -f
set timeout -1
log_user 0
spawn nc -UN /path/to/socket
set uart $spawn_id
send -i $uart "command1\n"
expect -i $uart "prompt> "
send -i $uart "command2\n"
expect -i $uart "prompt> "
Also changes default timestamp format from ISO8601 to classic 24-hour
format as this is assumed to be the format that most users would prefer.
And reintroduces strict but optional ISO8601 format.
This feature allows to easily add more timestamp formats in the future.
Allow user to select which ANSI color code to use to colorize the tio
text. To successfully set the color the color code must be in the range
0..255.
If color code is negative tio will print all available ANSI colors.
The default color is changed to bold white to make tio defaults usable
for most users, including color blind users.
Add a --map option which allows to map special characters, in particular CR and
NL characters which are used in various combinations on varios platforms.
Various platforms supports different baud rates.
To avoid adding platform specific handling generic baud rate detection
tests are introduced in the configure script. Successfully detected baud
rates are automatically enabled. This applies to both the C code and the
bash completion script.
Note:
Baud rates below 57600 are defined by POSIX-1 and supported by most
platforms so only baud rate 57600 and above are tested.
Renamed to "tio" because it is shorter and this new name also more
precisely reflects what the program is - a simple TTY terminal I/O
application.
"tio" can be considered short for terminal I/O or TTY I/O or a
combination of the two, whichever you prefer.
Also, wanted to avoid naming conflicts with other projects.
Autocompletion now resolves all arguments.
Also renamed 'gotty-bash-completion.sh' to 'gotty' to comply with the
normal naming scheme for completion files in /etc/bash_completion.d .
