To include the contents of another configuration file simply do e.g.:
[include raspberrypi.conf]
Also, included file can include other files which can include other
files etc.
This feature is useful for managing many configuration files and sharing
configuration files with others.
This change reintroduces timestamping in hex output mode but based on
timeout instead of new lines which made no sense. This means that
timestamps will only be printed when timeout time has elapsed with no
output activity from serial device.
Adds option --timestamp-timeout <ms> for setting the timeout value in
milliseconds.
Defaults to 200 ms.
Many modern RS-485 serial devices such as the ones from FTDI already
operate in RS-485 mode by default and will work with tio out of the box.
However, there are some RS-232/485 devices which need to be switched
from e.g. RS-232 to RS-485 mode to operate accordingly on the physical
level.
This commit implements the switching mechanism and interface required to
enable RS-485 mode. It only works on Linux and with serial devices which
use device drivers that support the Linux RS-485 control interface.
The RS-485 feature is detailed via the following options:
--rs-485 Enable RS-485 mode
--rs-485-config <config> Set RS-485 configuration
Set the RS-485 configuration using the following key or key value pair
format in the configuration field:
RTS_ON_SEND=value Set logical level (0 or 1) for RTS pin when sending
RTS_AFTER_SEND=value Set logical level (0 or 1) for RTS pin after sending
RTS_DELAY_BEFORE_SEND=value Set RTS delay (ms) before sending
RTS_DELAY_AFTER_SEND=value Set RTS delay (ms) after sending
RX_DURING_TX Receive data even while sending data
If defining more than one key or key value pair, they must be comma
separated.
Example use:
$ tio /dev/ttyUSB0 --rs-485 --rs-r485-config=RTS_DELAY_AFTER_SEND=50,RX_DURING_TX
Optional arguments, as parsed by the getopt_long mechanism, are
inherently inconsistent with how you define required arguments.
To avoid confusion we decide to avoid this inconsistency by replacing
optional options with additional options with required argmuments.
