The response wait feature waited for a line response, a string
terminated with either CR or NL. However, some devices may send a CR and
then their line content and then NL. This means tio will quit before
receiving and printing the line response. To solve this we simply ignore
the CR character and only consider lines terminated with a NL character.
This should work for all devices as lines are AFAIK always terminated
with either CRNL or a NL.
Fix regression so that it is possible to send the prefix key code to the
remote tio session without local tio session reacting to same key code
(quitting etc.).
Add key command 'ctrl-t f' which will toggle log on/off.
If no log filename has been specified via the 'log-filename' option then
tio will automatically generate a new log filename every time the log
feature is toggled on. Meaning, when toggled multiple times, multiple
log files will be generated.
However, if a log filename has been specified, tio will only write and
append to that same file.
Print the 2 character hex code that you input in hex mode but then
delete it before sending. This way it is easier to keep track of what
you are inputting. It basically mimics the ctrl-shift-u input mechanism
that is used to input unicode.
The feature is detailed via the following option:
--alert none|bell|blink
Set alert action on connect/disconnect.
It will sound the bell once or blink once on successful connect.
Likewise it will sound the bell twice or blink twice on disconnect.
Default value is "none" for no alert.
We generally try to list serial devices by ID but in the MSYS2/Cygwin
environment serial devices are not available by ID and so we simply list
the basic serial device paths instead.
Many modern RS-485 serial devices such as the ones from FTDI already
operate in RS-485 mode by default and will work with tio out of the box.
However, there are some RS-232/485 devices which need to be switched
from e.g. RS-232 to RS-485 mode to operate accordingly on the physical
level.
This commit implements the switching mechanism and interface required to
enable RS-485 mode. It only works on Linux and with serial devices which
use device drivers that support the Linux RS-485 control interface.
The RS-485 feature is detailed via the following options:
--rs-485 Enable RS-485 mode
--rs-485-config <config> Set RS-485 configuration
Set the RS-485 configuration using the following key or key value pair
format in the configuration field:
RTS_ON_SEND=value Set logical level (0 or 1) for RTS pin when sending
RTS_AFTER_SEND=value Set logical level (0 or 1) for RTS pin after sending
RTS_DELAY_BEFORE_SEND=value Set RTS delay (ms) before sending
RTS_DELAY_AFTER_SEND=value Set RTS delay (ms) after sending
RX_DURING_TX Receive data even while sending data
If defining more than one key or key value pair, they must be comma
separated.
Example use:
$ tio /dev/ttyUSB0 --rs-485 --rs-r485-config=RTS_DELAY_AFTER_SEND=50,RX_DURING_TX
Add a simple line response feature to make it possible to send e.g. a
command string to your serial device and easily receive and parse a line
response.
This is a convenience feature for simple request/response interaction
based on lines. For more advanced interaction the socket feature should
be used instead.
The line response feature is detailed via the following options:
-r, --response-wait
Wait for line response then quit. A line is considered any string ending
with either CR or NL character. If no line is received tio will quit
after response timeout.
Any tio text is automatically muted when piping a string to tio while in
response mode to make it easy to parse the response.
--response-timeout <ms>
Set timeout [ms] of line response (default: 100).
Example:
Sending a string (SCPI command) to a test instrument (Korad PSU) and
print line response:
$ echo "*IDN?" | tio /dev/ttyACM0 --response-wait
KORAD KD3305P V4.2 SN:32477045
Using fsync() on filedescriptors for serial ports can not be relied on.
Add use of tcdrain() to make sure data has been written by the serial
port before proceeding.
This fixes a problem with tio sometimes not writing piped input data to
the serial port before exiting which results in the pending writes being
cancelled / flushed.
When piping to tio it will automatically enter "non-interactive" mode
which means it will not react to any input key sequences but simple read
the input stream and write it to the tty device.
This also means that ctrl-t q can not be used to quit and so tio would
hang forever when used in non-interactive mode.
This change allows to send the standard termination signal by pressing
ctrl-c on tio in non-interactive mode to make it quit.
Replace existing toggle and pulse key commands with the following
generalized key commands which allows to toggle or pulse all serial port
lines:
ctrl-t g Toggle serial port line
ctrl-t p Pulse serial port line
When used, user will be asked which serial line to toggle or pulse.
Also introduce --line-pulse-duration option for setting specific pulse
duration in milliseconds for each serial line using a key value pair
format. Each key represents a serial line. The following keys are
available: DTR, RTS, CTS, DSR, DCD, RI.
Example:
$ tio /dev/ttyUSB0 --line-pulse-duration DTR=200,RTS=300,RI=50
Likewise, the pulse duration can also be set via configuration file
using the line-pulse-duration variable:
line-pulse-duration = DTR=200,RTS=300,RI=50
Make it possible to remap the prefix key (default: ctrl-t) by setting
the prefix-ctrl-key variable in the configuration file.
Allowed values are in the range a..z.
Example, to set the prefix key to ctrl-a simply do:
prefix-ctrl-key = a
Clean up so that only the following error related printing functions are
used: tio_error_printf(), tio_error_printf_silent(),
tio_warning_printf().
A session mode switch is introduced for error printing so that it will
print error messages with better formatting depending on in or out of
session.
