mirror of
https://github.com/tio/tio.git
synced 2026-05-01 14:57:59 +02:00
314 lines
9.5 KiB
Markdown
314 lines
9.5 KiB
Markdown
# tio - a simple serial device I/O tool
|
|
|
|
[](https://circleci.com/gh/tio/tio/tree/master)
|
|
[](https://github.com/tio/tio/releases)
|
|
[](https://github.com/tio/tio)
|
|
[](https://repology.org/project/tio/versions)
|
|
|
|
## 1. Introduction
|
|
|
|
tio is a simple serial device tool which features a straightforward
|
|
command-line and configuration file interface to easily connect to serial TTY
|
|
devices for basic I/O operations.
|
|
|
|
<p align="center">
|
|
<img src="images/tio-demo.gif">
|
|
</p>
|
|
|
|
### 1.1 Motivation
|
|
|
|
To make a simpler serial device tool for talking with serial TTY devices with
|
|
less focus on classic terminal/modem features and more focus on the needs of
|
|
embedded developers and hackers.
|
|
|
|
tio was originally created to replace
|
|
[screen](https://www.gnu.org/software/screen) for connecting to serial devices
|
|
when used in combination with [tmux](https://tmux.github.io).
|
|
|
|
## 2. Features
|
|
|
|
* Easily connect to serial TTY devices
|
|
* Automatic connect and reconnect
|
|
* Sensible defaults
|
|
* Support for non-standard baud rates
|
|
* Support for RS-485 mode
|
|
* List available serial devices by ID
|
|
* Show RX/TX statistics
|
|
* Toggle serial lines
|
|
* Pulse serial lines with configurable pulse duration
|
|
* Local echo support
|
|
* Map characters (nl, cr-nl, bs, lowercase to uppercase, etc.)
|
|
* Line timestamps
|
|
* Support for delayed output per character
|
|
* Support for delayed output per line
|
|
* Hexadecimal mode
|
|
* Log to file
|
|
* Autogeneration of log filename
|
|
* Configuration file support
|
|
* Activate sub-configurations by name or pattern
|
|
* Redirect I/O to UNIX socket or IPv4/v6 network socket for scripting or TTY sharing
|
|
* Pipe input and/or output
|
|
* Support for simple line request/response handling
|
|
* Bash completion
|
|
* Color support
|
|
* Visual or audible alert on connect/disconnect
|
|
* Remapping of prefix key
|
|
* Man page documentation
|
|
* Plays nicely with [tmux](https://tmux.github.io)
|
|
|
|
## 3. Usage
|
|
|
|
For more usage details please see the man page documentation
|
|
[here](https://raw.githubusercontent.com/tio/tio/master/man/tio.1.txt).
|
|
|
|
### 3.1 Command-line
|
|
|
|
The command-line interface is straightforward as reflected in the output from
|
|
'tio --help':
|
|
```
|
|
Usage: tio [<options>] <tty-device|sub-config>
|
|
|
|
Connect to tty device directly or via sub-configuration.
|
|
|
|
Options:
|
|
-b, --baudrate <bps> Baud rate (default: 115200)
|
|
-d, --databits 5|6|7|8 Data bits (default: 8)
|
|
-f, --flow hard|soft|none Flow control (default: none)
|
|
-s, --stopbits 1|2 Stop bits (default: 1)
|
|
-p, --parity odd|even|none|mark|space Parity (default: none)
|
|
-o, --output-delay <ms> Output character delay (default: 0)
|
|
-O, --output-line-delay <ms> Output line delay (default: 0)
|
|
--line-pulse-duration <duration> Set line pulse duration
|
|
-n, --no-autoconnect Disable automatic connect
|
|
-e, --local-echo Enable local echo
|
|
-t, --timestamp Enable line timestamp
|
|
--timestamp-format <format> Set timestamp format (default: 24hour)
|
|
-L, --list-devices List available serial devices
|
|
-l, --log Enable log to file
|
|
--log-file <filename> Set log filename
|
|
--log-strip Strip control characters and escape sequences
|
|
-m, --map <flags> Map characters
|
|
-c, --color 0..255|bold|none|list Colorize tio text (default: bold)
|
|
-S, --socket <socket> Redirect I/O to socket
|
|
-x, --hexadecimal Enable hexadecimal mode
|
|
-r, --response-wait Wait for line response then quit
|
|
--response-timeout <ms> Response timeout (default: 100)
|
|
--rs-485 Enable RS-485 mode
|
|
--rs-485-config <config> Set RS-485 configuration
|
|
--alert bell|blink|none Alert on connect/disconnect (default: none)
|
|
-v, --version Display version
|
|
-h, --help Display help
|
|
|
|
Options and sub-configurations may be set via configuration file.
|
|
|
|
See the man page for more details.
|
|
|
|
```
|
|
|
|
By default tio automatically connects to the provided TTY device if present.
|
|
If the device is not present, it will wait for it to appear and then connect.
|
|
If the connection is lost (eg. device is unplugged), it will wait for the
|
|
device to reappear and then reconnect. However, if the `--no-autoconnect`
|
|
option is provided, tio will exit if the device is not present or an
|
|
established connection is lost.
|
|
|
|
tio features full bash autocompletion.
|
|
|
|
#### 3.1.1 Examples
|
|
|
|
Typical use is without options:
|
|
```
|
|
$ tio /dev/ttyUSB0
|
|
```
|
|
|
|
Which corresponds to the commonly used default options:
|
|
```
|
|
$ tio -b 115200 -d 8 -f none -s 1 -p none /dev/ttyUSB0
|
|
```
|
|
|
|
It is recommended to connect serial tty devices by ID:
|
|
```
|
|
$ tio /dev/serial/by-id/usb-FTDI_TTL232R-3V3_FTGQVXBL-if00-port0
|
|
```
|
|
Using serial devices by ID ensures that tio automatically reconnects to the
|
|
correct serial device if it is disconnected and then reconnected.
|
|
|
|
List available serial devices by ID:
|
|
```
|
|
$ tio --list-devices
|
|
```
|
|
Note: One can also use tio shell completion on /dev which will automatically
|
|
list all available serial tty devices.
|
|
|
|
Log to file with autogenerated filename:
|
|
```
|
|
$ tio /dev/ttyUSB0 --log
|
|
```
|
|
|
|
Inject data to the serial device:
|
|
```
|
|
$ cat data.bin | tio /dev/ttyUSB0
|
|
```
|
|
|
|
Send command to serial device and wait for line response:
|
|
```
|
|
$ echo "*IDN?" | tio /dev/ttyACM0 --response-wait
|
|
KORAD KD3305P V4.2 SN:32475045
|
|
```
|
|
|
|
### 3.2 Key commands
|
|
|
|
Various in session key commands are supported. When tio is started, press
|
|
ctrl-t ? to list the available key commands.
|
|
|
|
```
|
|
[20:19:12.040] Key commands:
|
|
[20:19:12.040] ctrl-t ? List available key commands
|
|
[20:19:12.040] ctrl-t b Send break
|
|
[20:19:12.040] ctrl-t c Show configuration
|
|
[20:19:12.040] ctrl-t e Toggle local echo mode
|
|
[20:19:12.040] ctrl-t g Toggle serial port line
|
|
[20:19:12.040] ctrl-t h Toggle hexadecimal mode
|
|
[20:19:12.040] ctrl-t l Clear screen
|
|
[20:19:12.040] ctrl-t L Show line states
|
|
[20:19:12.040] ctrl-t p Pulse serial port line
|
|
[20:19:12.040] ctrl-t q Quit
|
|
[20:19:12.041] ctrl-t s Show statistics
|
|
[20:19:12.041] ctrl-t t Toggle line timestamp mode
|
|
[20:19:12.041] ctrl-t U Toggle conversion to uppercase
|
|
[20:19:12.041] ctrl-t v Show version
|
|
[20:19:12.041] ctrl-t ctrl-t Send ctrl-t character
|
|
```
|
|
|
|
If needed, the prefix key (ctrl-t) can be remapped via configuration file.
|
|
|
|
### 3.3 Configuration file
|
|
|
|
Options can be set via the configuration file first found in any of the
|
|
following locations in the order listed:
|
|
- $XDG_CONFIG_HOME/tio/tiorc
|
|
- $HOME/.config/tio/tiorc
|
|
- $HOME/.tiorc
|
|
|
|
The configuration file supports sub-configurations using named sections which can
|
|
be activated via the command-line by name or pattern. A sub-configuration
|
|
specifies which tty to connect to and other options.
|
|
|
|
Example configuration file:
|
|
|
|
```
|
|
# Defaults
|
|
baudrate = 9600
|
|
databits = 8
|
|
parity = none
|
|
stopbits = 1
|
|
color = 10
|
|
|
|
[rpi3]
|
|
tty = /dev/serial/by-id/usb-FTDI_TTL232R-3V3_FTGQVXBL-if00-port0
|
|
baudrate = 115200
|
|
no-autoconnect = enable
|
|
log = enable
|
|
log-file = rpi3.log
|
|
line-pulse-duration = DTR=200,RTS=150
|
|
color = 12
|
|
|
|
[usb devices]
|
|
pattern = usb([0-9]*)
|
|
tty = /dev/ttyUSB%s
|
|
color = 13
|
|
```
|
|
|
|
To use a specific sub-configuration by name simply start tio like so:
|
|
```
|
|
$ tio rpi3
|
|
```
|
|
Or by pattern match:
|
|
```
|
|
$ tio usb12
|
|
```
|
|
|
|
Another configuration file example is available [here](example/tiorc).
|
|
|
|
## 4. Installation
|
|
|
|
### 4.1 Installation using package manager (Linux)
|
|
|
|
Packages for various GNU/Linux distributions are available. Please consult your
|
|
package manager tool to find and install tio.
|
|
|
|
If you would like to see tio included in your favorite distribution, please
|
|
reach out to its package maintainers team.
|
|
|
|
### 4.2 Installation using snap (Linux)
|
|
|
|
Install latest stable version:
|
|
```
|
|
$ snap install tio
|
|
```
|
|
|
|
### 4.3 Installation using brew (MacOS, Linux)
|
|
|
|
If you have [brew](http://brew.sh) installed:
|
|
```
|
|
$ brew install tio
|
|
```
|
|
|
|
### 4.4 Installation using MSYS2 (Windows)
|
|
|
|
If you have [MSYS2](https://www.msys2.org) installed:
|
|
```
|
|
$ pacman -S tio
|
|
```
|
|
|
|
### 4.5 Installation from source
|
|
|
|
The latest source releases can be found [here](https://github.com/tio/tio/releases).
|
|
|
|
Install steps:
|
|
```
|
|
$ meson build
|
|
$ meson compile -C build
|
|
$ meson install -C build
|
|
```
|
|
|
|
See meson\_options.txt for tio specific build options.
|
|
|
|
Note: The meson install steps may differ depending on your specific system.
|
|
|
|
|
|
## 5. Contributing
|
|
|
|
tio is open source. If you want to help out with the project please feel free
|
|
to join in.
|
|
|
|
All contributions (bug reports, code, doc, ideas, etc.) are welcome.
|
|
|
|
Please use the github issue tracker and pull request features.
|
|
|
|
Also, if you find this free open source software useful please feel free to
|
|
consider making a donation of your choice:
|
|
|
|
[](https://www.paypal.me/lundmar)
|
|
|
|
|
|
## 6. Support
|
|
|
|
Submit bug reports via GitHub: https://github.com/tio/tio/issues
|
|
|
|
|
|
## 7. Website
|
|
|
|
Visit [tio.github.io](https://tio.github.io)
|
|
|
|
|
|
## 8. License
|
|
|
|
tio is GPLv2+. See LICENSE file for more details.
|
|
|
|
|
|
## 9. Authors
|
|
|
|
Created by Martin Lund \<martin.lund@keep-it-simple.com>
|
|
|
|
See the AUTHORS file for full list of contributors.
|